Nest Thermostat E

What is the Nest Thermostat E?

Smart thermostats can save you money, but the biggest issue is that most require professional installation with a device wired into the boiler. No such requirements with the Nest Thermostat E – this model can be user installed in under an hour in the majority of homes that have an existing wired thermostat.

A new-look plug-in thermostat with far simpler controls next to the existing Nest Learning Thermostat, plus a data-driven pre-programmed schedule means that the heating needs for the majority of owners will be ready out of the box. Note that there’s no hot water support with this model, which may be a deal-breaker for some.

Nest Thermostat E – Design and installation

Traditional heating systems typically comprise of two components. The programmable controls set the times the boiler will fire up the heating; the wired thermostat lets the boiler fire within these times only if the current temperature is lower than the set point.

With the Nest Thermostat E you set your existing controller to be permanently on, but replace the wired thermostat with the battery-powered Heat Link E. The Heat Link E is then controlled via the plug-in thermostat, which turns the heating on and off via temperature (as before) and its own internal schedule.

The advantage of this system is that you get to place the thermostat where you want it, with the Heat Link E screwed to the wall where the old thermostat used to fit. The sensible choice is to place the Thermostat E in the most-used room.

Given that the Heat Link E will be on display, Nest has decked it out in a sleek grey material cover. It’s very much along the same lines as the Google Home Mini, which is no surprise given that Google owns Nest.

Related: Google Assistant guide

Installation of the Heat Link E is exceptionally simple. Using the Nest app, which also controls the company’s security cameras including the Nest Hello, Nest Cam IQ Outdoor and Nest Cam IQ, you’re asked a few simple questions about your heating and the number of wires to the thermostat. Your answers help the app show you the right installation method, and where to put the existing wires.

The setup procedure also helps you get the thermostat set up, hooking it up to your Wi-Fi network. If you’ve got existing Nest devices, these can help auto-configure the thermostat.

That’s the theory, but experience has shown that to get this working, you may have to move the thermostat around your home getting it closer to another Nest device. Sadly, there’s no way to override the automatic setup and just pick a Wi-Fi network manually if the auto setup doesn’t work.

The Nest Thermostat E is fixed to a weighty stand; it can’t be wall mounted. Its main display gently diffuses through a white front, giving a softer view than the more techy-looking Nest Thermostat E.

The outside of the thermostat gently rotates, as with the Learning Thermostat, letting you adjust temperature or setting; the weighty stand helps here, keeping the Thermostat E stable as you make adjustments.

Nest Thermostat E – Features

One of the key differences of the Nest Thermostat E, compared to its competition, is that it comes pre-programmed with a schedule based on data from millions of existing Nest users. The idea was to give a schedule that suits most people so that, out-of-the-box, the Thermostat E is ready to go.

For most people, the schedule is about right. For weekdays, the heat is set to 20ºC from 6:00 then down to 16ºC at 8:30. In the evening, the heat goes to 20ºC at 16:30 and down to 15C at 22:30. At weekends, the temperature is set to 20ºC all day from 7:45 until 22:30, when the set temperature drops to 15ºC.

Beyond that, the Thermostat E starts to learn as you use it, adjusting the schedule based on how you use the thermostat and turn the heating up or down. If you want more drastic changes immediately, then there’s complete control over the schedule both in-app and via the main thermostat. The latter is a bit trickier to use than the app.

In-app, scheduled points can be dragged up or down to adjust temperature, or left or right to adjust the start/end times. You can add additional schedule points, too, say for a burst of heat mid-day in a kitchen.

Selecting any energy-efficient temperature shows a green leaf on the display, which is a handy and visual way of helping to monitor your settings.

As with previous Nest products, True Radiant helps prevent temperature overshoot by learning how long your home takes to warm up and then shutting down the boiler earlier. This can save money in the long term, as you run your boiler for less time.

Note that the Thermostat E can distinguish between ambient temperature and direct sunlight, so it won’t be confused by a cold, bright day.

As well as the temperature read-out, the thermostat has a humidity sensor – although that’s just for information; you can’t do anything with it. Likewise, the Heat Link E has a temperature sensor, also just for information.

Home/Away assist uses your phone’s location (and those of family members) to automatically turn the heating to Eco mode when you go out, and back to heat when you return. Nest also uses the motion sensor built into the front of the thermostat to help predict your location, as an added check (and for not turning off the heating for a guest that doesn’t have your Nest app if you go out).

Nest Thermostat E – Amazon Alexa, Google Assistant, IFTTT and Works with Nest

The Google Assistant is supported, giving you voice control over temperature settings, and the thermostat’s mode: you can toggle Eco mode on and off, for example. If you have a Google Home Hub, you can use the on-screen controls to make changes, too. Amazon Alexa support isn’t yet available, although given that the Learning Thermostat is supported it shouldn’t be too long before that skill becomes available.

The standard IFTTT channel also exists. From here you can trigger other devices when the temperature rises to hit a certain point, or when it drops past a set level. And you can also set the thermostat to a set temperature automatically.

Works with Nest is available, as you’d expect, with a clever rule that can turn your heating off if the Nest Protect picks up a carbon monoxide leak.

Related: Amazon Alexa guide

Nest Thermostat E – Performance

As the Heat Link E is battery powered, Nest doesn’t have it constantly listening for the signal to turn on. Dialling the heat up or down manually results in a slight delay before the heating kicks on or off.

With the Nest Learning Thermostat, results are instant, as all parts are mains powered. Does that matter? Not particularly – up to a 30-second delay in operation isn’t enough to make the Thermostat E unresponsive.

After a week of use, my schedule started to change; the thermostat learned that I was around during the day and naturally wanted the room warmer.

The temperature sensor in the Thermostat E lined up pretty well with an external temperature probe and the measurements were within 1ºC of each other. It’s important to remember that with any device, the temperature in different parts of the room and house can vary massively.

I continue to like the display, which shows you how long until the set temperature will be reached. This improves in accuracy the longer you have the thermostat installed.

Why buy the Nest Thermostat E?

The standard Nest Learning Thermostat offers greater features, including a screen that can display such information as the current weather, for example. It’s available in a wider range of colours, too, making it the premium choice. It can also handle hot water. It’s only £20 more expensive, but the optional stand costs £30 more. Factor in professional installation and its overall price continues to rise.

Related: Best smart thermostats

The closest competition is the Tado Smart Thermostat, which can also be user installed, replacing an old wired thermostat with the new one. That system can be expanded with additional radiator valves for individual room control, too. The main downside is that you end up placing the main thermostat in the location of your old one. The Nest Thermostat E lets you choose where to put your new thermostat.

Verdict

Given its simplicity and great looks, the Thermostat E is a great upgrade for many UK homes that want to save money on their heating – but don’t want the extra expense and hassle of a professional installation.

The post Nest Thermostat E appeared first on Trusted Reviews.